1933-1942 Willys Window Glass-Click on Headings for Downloadable PDF
The technical information including images of the original glass book page listings on original ’33-’42 Willys Coupe, Sedan and Pickup was kindly provided by Brian Nebergal, SoCal Classic Autoglass Connection, Escondido, Ca, 760-807-8968 or email at socalclassicautoglassconnection@msn.com
National Auto Glass Specifications (NAGS) Book Terminology; NAGS Pattern # -Refers to the template pattern used to cut this specific piece of glass; Block Size-size in inches of the starting piece of glass used with the NAGS pattern to cut the glass to the correct size; Finish Glass Size: Actual height and width of the highest and widest sections of the finished glass for the vehicle after cutting it out using the NAGS Pattern # template.
See at the bottom of the page for a complete spread sheet/pdf chart of 1937-42 Willys glass specifications.
1930-36 Willys Window Glass Part Numbers
1937-48 Willys Window Glass Part Numbers
1937, 38 & 39 Pickup door glass final measurements are 13 15/16 inches tall by 27 11/32 inches wide, cut from a 14 inch by 28 inch block of flat glass.
1938 Willys Pickup Door Glass Installation-Same for all ’37-39 Willys Pickups and most of the ’37-39 4Door Sedan Front doors
1937-42 Willys Glass Specifications-Glass Block and Finished Sizes-Click to download a PDF copy
The technical information including images of the original glass book page listings on original ’33-’42 Willys Coupe, Sedan and Pickup was kindly provided by Brian Nebergal, SoCal Classic Autoglass Connection, Escondido, Ca, 760-807-8968 or email at socalclassicautoglassconnection@msn.com
National Auto Glass Specifications (NAGS) Book Terminology; NAGS Pattern # -Refers to the template pattern used to cut this specific piece of glass; Block Size-size in inches of the starting piece of glass used with the NAGS pattern to cut the glass to the correct size; Finish Glass Size: Actual height and width of the highest and widest sections of the finished glass for the vehicle after cutting it out using the NAGS Pattern # template. Working on the rest of the finished glass dimensions for this chart.